Air Presses

LIGHT-DUTY AIR PRESS

These versatile air presses can be used in assembly operations requiring less than 500 pounds of down force. It can be tooled using low cost, miniature die sets. The light-weight design makes it easy to move from place to place.

The presses feature standard no-touch buttons which are superior to mechanical push buttons. Just the presence of your fingers on these photoelectric buttons interrupts the infrared sensing beam to activate the switch. The press stays on as long as your fingers remain in place. This eliminates hand, wrist and arm stress associated with repeated, mechanical switch operation which greatly reduces the risk of Carpal Tunnel Syndrome.

• Filter, regulator, lubricator and gage
• Dual, anti-tiedown, no-touch ergonomic actuation
• Large 8"x8" tapped bolster plate for easy tool setup
  (3/8-16 tapped holes)
• Drilled hold-down feet for easy mounting to a bench
• Cylinder to base plate clearance of 0 to 20.5" in 1" increments

SN165- SPECIFICATIONS
Power requirements: 110-120 VAC, 50/60 Hz
Current draw @ full rated output: 1 amp
Pneumatic requirements: Clean, dry air @ 80-100 psig
Maximum force: 125lbs @ 100psig
Stroke length: 4” (10.16 cm)
Weight: 44lbs

SN166- SPECIFICATIONS
Power requirements: 110-120 VAC, 50/60 Hz
Current draw @ full rated output: 1 amp
Pneumatic requirements: Clean, dry air @ 80-100 psig
Maximum force: 480lbs @ 100psig
Stroke length: 4” (10.16 cm)
Weight: 45lbs.

SN165 - 125 lbs. of force
SN166 - 480 lbs. of force

Return to Other Assembly